Electrical installation works
Comprehensive electrical installation for apartments, penthouses, cottages, residences, restaurants, spas, pools, offices, showrooms and production premises.
We bring electrical, low-current and related engineering systems into one clear infrastructure: power supply, switchboards, lighting, communications, security, fire alarm, voice alarm and evacuation control, ventilation and automation.
We work by stages: inspection, technical solution, design, installation, testing, labeling, as-built recording and handover for operation.
Load calculations, group diagrams, routes, switchboards, low-current lines and equipment connection points.
Cable routes, wall chases, trays, corrugated conduit, switchboards, sockets, lighting and connection of engineering equipment.
Checking lines, protection devices, labeling, operating scenarios and readiness of the property for use.
Full scope of works
Below are specific electrical installation areas usually required on premium properties: from power lines and switchboards to low-current systems, fire automation, ventilation and restoration of old networks.
- Incoming supply and power distribution across the property.
- Group lines for lighting, sockets, appliances and engineering equipment.
- Cable routes in walls, ceilings, trays, pipes and technical shafts.
- Connection of kitchens, laundries, boiler rooms, pump rooms, server rooms and technical areas.
- Dedicated lines for high-power loads: hobs, ovens, boilers, saunas, heat pumps and ventilation units.
- Phase load balancing and preparation of power reserve.
- Assembly of apartment, floor, cottage, technical and distribution switchboards.
- Reassembly of old cabinets: removing disorder, replacing weak nodes, correct layout and labeling.
- Breakers, RCDs, differential breakers, voltage control relays, surge protection devices, contactors, timers, relays and terminal groups.
- Space prepared for automation, BMS, smart home, metering, backup power and future servicing.
- Separation of power, low-current and control circuits.
- Clear diagrams and tags so the property can be serviced without searching for “what goes where”.
- Internet, Wi-Fi, access points, routers, switches, patch panels and server cabinets.
- Video surveillance, intercoms, access control, security alarm and access sensors.
- Television, acoustics, multiroom, audio/video lines and preparation for the client’s equipment.
- Cable infrastructure for control of curtains, gates, wickets, lighting and engineering systems.
- Leak, motion, temperature, humidity, smoke and emergency condition sensors.
- Line testing, port labeling and neat patching.
- Installation of fire alarm lines according to the design.
- Installation of detectors, manual call points, control panels, modules and actuating devices.
- Voice alarm and evacuation control systems: illuminated signs, sound lines, voice modules and scenarios.
- Integration with ventilation, dampers, smoke extraction, lifts, doors and dispatching where the design requires it.
- Line integrity checks, labeling and preparation for commissioning.
- As-built recording of routes and connection points.
- Power supply for supply and exhaust units, fan coils, air conditioners, pumps and automation.
- Connection of dampers, actuators, sensors, thermostats, control panels and controllers.
- Dedicated lines for ventilation of restaurants, kitchens, spas, hammams, pools and technical rooms.
- Cable routes for microclimate automation and dispatching.
- Integration with fire scenarios and emergency shutdown where required.
- Power preparation with service access and future maintenance in mind.
- Complete restoration of electrical systems from scratch after poor-quality installation.
- Search for breaks, overheating, weak connections, switchboard errors and hidden faults.
- Replacement of dangerous lines, old automation, unclear labeling and overloaded groups.
- Relocation of switchboards, separation of groups, adding lines and preparing the property for new loads.
- Modernization without unnecessary damage to finishes when the property is already in use.
- Bringing the system to a clear, serviceable and safe structure.
Property types we work with
Each property type needs its own work scheme: different loads, different operating modes, different requirements for access, safety and appearance.
- Incoming and apartment switchboard, sockets, lighting, lighting scenarios and kitchen equipment.
- Low-current systems, Wi-Fi, cameras, intercom, leak sensors and preparation for smart home.
- Careful work near designer finishes, furniture and finished surfaces.
- Several switchboards, incoming supply, backup power, gate automation, outdoor lighting and technical buildings.
- Boiler rooms, pump rooms, pools, spas, hammams, ventilation and engineering equipment.
- Service access, labeling, spare lines and convenient maintenance after handover.
- Electrical systems for kitchens, extract hoods, refrigeration equipment, dishwashing areas and cash desk zones.
- Load separation, emergency shutdown, work lighting and decorative lighting.
- Low-current systems, cameras, Wi-Fi for guests and staff, sound and alarm systems.
- Power for pumps, filtration, heating, dehumidification, ventilation and automation.
- Lines for wet zones with protection, access and service maintenance considered.
- Coordination of electrical systems with plumbing, ventilation, microclimate and automation.
- Workstations, lighting, server cabinets, access control, video surveillance and Wi-Fi.
- Rerouting lines, moving sockets, additional groups and switchboards.
- Preparing the space for a tenant, staff, clients and the operation team.
- Power lines, distribution switchboards, equipment, pumps, ventilation and automation.
- Cable trays, labeling, service passages and a clear route structure.
- Modernization of operating lines with shutdowns, safety and staging considered.
How we perform electrical installation
The sequence is needed so electrical systems do not conflict with ventilation, plumbing, finishes, furniture and the client’s equipment.
- We inspect the property, existing switchboards, routes, incoming supply and equipment.
- We record loads, the owner’s wishes, designer requirements and related contractors’ requirements.
- We define what can be kept, what must be replaced and where the risks are.
- We prepare diagrams for groups, switchboards, routes and connection points.
- We coordinate electrical systems with ventilation, plumbing, pool, kitchen, fire systems and automation.
- We agree service access, heights, installation zones and work order.
- We mark routes, switchboards, points, penetrations and hidden work zones.
- We protect finishes and agree the work order in occupied premises.
- We prepare materials, cable, automation, cabinets and fasteners.
- We lay cables, assemble switchboards, connect equipment and low-current lines.
- We separate power, control and information circuits.
- We record hidden routes with photos before structures are closed.
- We check line integrity, operation of protection devices, labeling correctness and patching.
- We test lighting, automation, ventilation, security and alarm scenarios.
- We correct comments before handing the property over to the client.
- We hand over diagrams, labeling, photo records and the list of key equipment.
- We show where groups, breakers, low-current ports and service zones are located.
- We leave a clear basis for future service and modernization.
What the client receives
The result must be clear not only on the wall, but also inside the switchboard, above the ceiling, in the technical room and in the as-built documentation.
- A clear structure of groups, switchboards, lines and responsibility zones.
- Labeling of cables, breakers, ports and key connection points.
- Photo recording of hidden routes and nodes before finishes are closed.
- As-built diagrams, equipment list and operating recommendations.
- Checked lines and protection devices ready for normal daily load.
- An engineering system that can be serviced, extended and modernized.
Premium approach
For expensive properties, what matters is not loud promises but neat implementation, safety, documentation and the ability to service the system calmly years later.
Works are carried out in clear stages, linked with related contractors, finishes and equipment deliveries.
Electrical systems are coordinated with ventilation, plumbing, fire systems, automation, furniture and design.
In occupied premises, work zones, surface protection and access are agreed in advance.
For private residences, apartments and restricted-access properties, we follow the work regime and do not disclose details.
Switchboards, routes and connection points are made so they can be serviced, checked and extended.
Labeling, diagrams, hidden work records and equipment lists support operation and audit.
It is not just “running a cable”
It is necessary to create a system where it is clear which line is where, what each breaker is responsible for, and how switchboards, low-current systems, ventilation, fire scenarios and automation are connected. This is what separates proper electrical installation from a random set of wires.